Ga door naar hoofdinhoud

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Vragen Bekijk alle

iMac won't boot after teardown! Please Help!

I have never seen something like this in many years of repairing, diagnosing and building computers. Just had finished taking the mac apart, to clean the fans clogged with dust. Put everything back in place, pram battery as well, now the system won't boot. It will turn on, the fans are starting, 3 out of 4 leds on, but no chime or image on the screen and no image on an external screen either. I have tried pram and smc reset and it beeps if I will take the ram out. Please advise or it's going out the window.

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
1 Opmerking

Have just finished taking it apart again and disconnecting the inverter again. No joy, no nothing. In the end I said, one more try..how about I'll put the 1GB bar of ram it came with? And the bloody thing works now. I am just speechless. My 14 years of computer repairs experience is going to the bin. PC2 5300 vs PC2 6400.

door

Voeg een opmerking toe

1 Antwoord

Gekozen oplossing

Based on the diagnostic LEDs, the display may not be connected properly, or the display or inverter might be broken. For more, look here: Where can I find the diagnostic LEDs on first iMac Intel?

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Adrian zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 126