Repareer je spullen Gemeenschap Winkel

Model No. A1367 / 8, 16, 32, or 64 GB capacity

914 Vragen Bekijk alle

Opties

White Lines on iPod Touch 4th Gen LCD

I have replaced the LCD/Digitizer on this iPod, and when I plug the power in (or turn it on), if I leave the screen kind of there, but not pushed down all the way, it seems to work great. Picture is good, touch works, etc.

However, when I go to press the screen down (i'm test fitting before removing the cover from the adhesive), I start to get horizontal white lines. Once I see them, I stop immediately, because I don't want to damage anything.

What could be the problem? Could it be that I don't have the LCD cable plugged back in correctly/all the way? Is the LCD cable the one that plugs from the top of the logic board, or the one on the botttom?

Thanks

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

Sounds like you have bought a bad LCD . The LCD is the one that plug in on top of the logic board

Was dit antwoord nuttig?

Ja Nee
Score 1

1 Opmerking:

Thanks for the response. It turned out to be that I did not have the LCD plug seated correctly. Once I got that seated correctly, it worked.

door

Voeg een opmerking toe

Opties

My iPod has horizontal lines on it and I can't see my screen properly

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Bobby zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 891