Ga door naar hoofdinhoud

The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

49 Vragen Bekijk alle

Putting a 3rd hd in the zip caddy of a g4 quicksilver

I followed the g4 quicksilver teardown sequence( (step 11-12) and I want to add a 3rd hard drive. The drive fits in the zip tray alright but the screw holes on the drive don't line up. Do I need to alter this caddy to make it fit or can it just lay in there?

Thank you.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score -1
Voeg een opmerking toe

3 Antwoorden

Het nuttigste antwoord

velcro works fine for this type of thing

Was dit antwoord nuttig?

Score 3

3 opmerkingen:

Good idea!

door

I agree. Ralph +

door

What is the master-slave relationship of the drives (2 per bus)?

door

Voeg een opmerking toe

You should be able to just lay it there, it really isn't going anywhere. You could drill new holes if you wanted too, but it shouldn't be nessicary.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Thanx very much for your answers, I took my Dremel and 'oval'ed the hole out to fit the screw in. But after reassembly, then my old Pioneer 104 optical DVD drive went dead. Ah well, back to the workbench.

thanks and regards,

Crocdog

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe

Voeg je antwoord toe

Crocdog zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,047