Ga door naar hoofdinhoud

The HP Pavilion dv2000 Notebook PC is an entertainment based PC produced in 2007.

23 Vragen Bekijk alle
Vraag afgerond

My computer displays "Failed to create E:\sdv.flg error" what to do?

I tried to reboot my computer and when I used the first install disk from HP, after about 4% of it being complete a message pops up saying "Failed to create E:\sdv.flg error". I was wondering what the issue is and how to fix it. The computer is less than a year old and tech support was no help from HP. I was on hold while they tried to figure out what was happening for 45mins and came up with nothing

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

It sounds like you are trying to restore the operating system from the restore cd. Is this correct?

Possible cause of failure durring the OS restore could be a scratched or dirty cd, bad RAM or bad hard drive.

Double check the CD that it is clean and has no scratches.

To test for bad RAM and hard drive I believe there is a test inside the BIOS, which you can access by pressing the proper key right after turning on the computer.

If there isn't a tool to test RAM and hard drive in the BIOS, if you have access to another computer, you can find download and burn the Ultimate Boot CD, which has a RAM (Memory) test, and hard drive test.

Was dit antwoord nuttig?

Score 0
Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 482