Rep: 1
1
Does anyone know if it's possible to replace a A1212 MacBook Pro 17 inch screen with a different resolution?
Currently i have 1680x1050 but i see a lot of 1920x1024 screens... Would it be possible to replace it. The video card supports the resolution on an external monitor.
Is dit een goede vraag?
Rep: 87,6k
161
82
213
I haven't tried this, but theoretically it should be possible...
First, follow this guide to remove the display assembly.
Then, use steps 18-32 of this guide and some intuition to remove the LCD panel.
Finally, follow steps 33-38 of the same guide for the installation procedure.
Good luck! Please be sure to post the results.
Handleiding
Moeilijkheid:
Moeilijk
—
1 - 2 hours
Handleiding
Moeilijkheid:
Zeer moeilijk
Was dit antwoord nuttig?
+ Ralph
And what were the results on this attempt?
Curious :)
Rep: 404
5
1
sorry to be a bummer, but the apple logic boards have rom's that only recognize specific displays. If you install it, it will turn on but once the bootloader finishes and the OS starts to load, the screen will go black and you wont be able to brighten it
Was dit antwoord nuttig?
Afgelopen 24 uren: 1
Afgelopen 7 dagen: 2
Afgelopen 30 dagen: 3
Altijd: 3,158
3 opmerkingen
I think may be one for Ben to answer. From what I find its not possible but I would go with what he says. Ralph
door rj713
How can i contact Ben for this? I would imagine that the resolution might be fixed from the screen and not the interface. If so it maybe is possible... I keep on hoping :)
door Questor
Anyone?
door Questor