metal pin in housing by the power switch - replacement methods?

Question

iPhone 5

Repair information, troubleshooting tips, and guides for the sixth iteration of Apple iPhone, announced on September 12, 2012. Model: A1428, A1429

2522 Vragen Bekijk alle

Sally Kaur @sallykaur

Rep: 13

Gepost: 12 feb. 2013

Opties

metal pin in housing by the power switch - replacement methods?

Hello everyone.

I am having my back cover replaced to a bespoke one on my iphone 5.

the problem they are facing is this metal pin that is on the inside of the original housing.

this is not on the piece i have that im asking them to swap it with.

After some research i believe this is some sort of earthing pin and without this tiny little pin- the phone will not work.

Does anyone have any suggestions or tips to fix this or replace this pin

just to clarify

The new casing does not have this pin

The phone will not work without this

I have no spare pins

What has everyone else done?

your help - appreciated.

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee

Score 1

Voeg een opmerking toe

5 Antwoorden

Phone Reps @phonereps Rep: 25 1 · Answer 1 · 2013-10-01T17:17:12-07:00

Het nuttigste antwoord

Phone Reps @phonereps

Rep: 25

1

Gepost: 1 okt. 2013

Opties

you will need 3 things, a small pair of side cutters, i mean small, a 6 inch screw driver and the small iphone pentalope screw driver.

to remove:

place aluminium casing on its back on a flat surface.

you can see the pin.

gently grip the pin using your small side cutters from the bottom of the pin

place your 6inch screw driver under the cutters and use the cutters as a falcrum

the pin will lift out gently.

to fit:

use your small pentelope screw driver and gently (using a screw motion) open the hole closer to the top, this will give the pin a bit more room and wont break the small casting when tapping the pin in.

tap the pin in gently until the top surface, this take in total around 1.5 minutes to do from start to finish.

good luck.

Was dit antwoord nuttig?

Ja Nee

Score 2

1 Opmerking:

who the !&&* has microscopic side cutters...?

26 mrt. 2015 door gpersaud

Voeg een opmerking toe

Alex Yang @alexyang10574 Rep: 1 · Answer 2 · 2013-02-23T18:04:56-07:00

Alex Yang @alexyang10574

Rep: 1

Gepost: 23 feb. 2013

Opties

I had the same issue, though I don't know if its that important as they make it out to be, just use a sewing pin or something that fits in there, all I think it does is act as a hinge

Was dit antwoord nuttig?

Ja Nee

Score 0

Voeg een opmerking toe

Tom Chai @tomchai Rep: 73,8k 19 111 82 · Answer 3 · 2013-04-23T04:17:31-07:00

Tom Chai @tomchai

Rep: 73,8k

19

111

82

Gepost: 23 apr. 2013

Opties

It's just a structural support pin, No electrical function. Don't press the power switch too hard and nothing would happen.

If you really want to replace it, try extracting it from the original case and hammer it into the new one. You'll completely destroy the old one and risk wrecking the new one. But it is possible. I did it.

Was dit antwoord nuttig?

Ja Nee

Score 0

Voeg een opmerking toe