Rep: 1
1
I fried my cpu on my MacPro 2006. Has anyone found a good step by step manual to do this? Perhaps a youtube video? Also, I'm especially concerned about the cpu heat sink bond and if there are any pitfalls I need to be aware of!
Is dit een goede vraag?
Rep: 685,2k
3,4k
1,1k
2,6k
You would need to replace the logic board. Read through this assessment before going ahead: http://www.everymac.com/systems/apple/ma...
Was dit antwoord nuttig?
Rep: 345
5
5
1
The macbook pro you have has soldered on CPU. You cannot change it without the appropriate equipment. Also, a Xeon chip will probably never work with your computer's chipset in the first place, and Xeons are a socketed CPU, not soldered. Im pretty sure your stuck with your CPU.
Was dit antwoord nuttig?
It is a MacPro, 1,1, early 2006.
Oh sorry man, I totally thought I saw a macbook in the title, sorry for your confusion. You should take a look at Mayer's post XD
Could you expand this topic a little further? Which series have the CPU soldered and which don't? Were the first Quad-Core CPUs (MacPro2,1) already soldered?
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 523
