Repareer je spullen Gemeenschap Winkel

Revamped version of the iPhone 3G with faster processing speeds. Repair of this device is similar to the 3G, and requires simple screwdrivers and prying tools. Model A1303 / 8, 16 or 32 GB capacity / black or white plastic back.

1500 Vragen Bekijk alle
Vraag afgerond

Opties

White screen on 3GS, replaced with 3G. Now original screen is dead

I have an iPhone 3GS with the know white screen of death. The problem appeared to be the display cable, because when applying a little pressure on it the display worked.

I received a new LCD and after installing it remained black. Switched back to the original display and it remained black too. The phone is still recognised by iTunes as I was able to do a restore.

I noticed the connectors are a bit different and after searching I noticed I received a display for an iPhone 3G.

My question is, should I order a new display and try again or is there a bigger damage caused by using the wrong display?

Beantwoord! Bekijk het antwoord Dit probleem heb ik ook

Is dit een goede vraag?

Ja Nee
Score 0
Voeg een opmerking toe

2 Antwoorden

Filteren op:
Meest nuttige Nieuwste Oudste
Gekozen oplossing

Opties

It's ic display broken

Was dit antwoord nuttig?

Ja Nee
Score 0
Voeg een opmerking toe
Het nuttigste antwoord

Opties

Nick, you should be okay for as long as you did not bend anything else in the connector. Take a good look at the contacts, make sure they are not bend or broken.

Was dit antwoord nuttig?

Ja Nee
Score 1

3 opmerkingen:

Nothing is broken. My concern is whether something got short-circuited.

door

Most likely not. Biggest issue with that error, and it happens more often than you think, is a broken connector.

door

Hi, u cannot put a 3g display to a 3gs display!!!!

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 398