13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

610 Vragen Bekijk alle

Are these upper cases interchangeable?

I bought the upper case of the 2.4 GHz Model and wanted to change it because the keyboard of that uppercase has back light. But the problem is my logic board does not have the connector for the led ribbon cable, but ifixit says that it should work and the upper cases are fully compatible. Are they interchangeable?

Beantwoord! View the answer Dit probleem heb ik ook

Is dit een goede vraag?

Score 1
Een opmerking toevoegen
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12
Verspreid de kerstsfeer
Krijg 12€ korting op je aankoop van 50€ of meer met de code FIXMAS12

4 Antwoorden

Gekozen oplossing

Yes, They are interchangeable, yes, you do have that connection on your board, yes, when plugged in, they keyboard will light up.

The Backlight Connector is Beside the Keyboard connector,

http://s1.guide-images.ifixit.com/igi/om...

Was dit antwoord nuttig?

Score 2

Commentaar:

I concur!

door

I apologise, this appears to be correct

door

Een opmerking toevoegen

Thanks for you answer...

But my Logic board really does not have the led ribbon cable connector.

Here is a pic of my Macbook:

http://www.siteki.de/macbook_unibody_2.0...

I hope you can help me.

Was dit antwoord nuttig?

Score 0

Commentaar:

Thanks for the picture, I'm not sure what to say, it should be there, and you can even see the solder mount of were the connector would go if it were actually present. Apple Makes two logic boards for this model, we call them "better" and "best." since "better" has the CTO option for backlit keyboards, all logic boards are manufactured with the connector. It appears that your board was either a manufacturing defect, or the connector somehow was broken off at some point.

door

Een opmerking toevoegen

What is the little ribbon near your screwdriver ? And yes we can see the connector on your pict.

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

The ribbon cable is from the led sheet from my new topcase...The connector is not there, only the soldering contacts.

Does anybody know the right pin order?

Can i solder it with a normal cheap soldering iron or has it to be an anti static iron?

Sorry for my bad english, I am from germany ;-)

--

thanks

fufu87

Was dit antwoord nuttig?

Score 0
Een opmerking toevoegen

Voeg je antwoord toe

fufu87 zal eeuwig dankbaar zijn.
Weergavestatistieken:

Afgelopen 24 Uren: 0

Afgelopen 7 Dagen: 0

Afgelopen 30 Dagen: 0

Altijd: 2,437