Ga door naar hoofdinhoud

GSM iPad 2 with 16, 32, or 64 GB of storage, and a Dual Core A5 Processor. Model Number A1396. Repair is complicated and requires heat and prying.

151 Vragen Bekijk alle
Vraag afgerond

Wifi still poor after wifi cable replacement!

Hi, I'm new here, and I have successfully replaced the digitiser on an iPad 2 after the screen was cracked. During the replacement, the wifi antenna had ripped, so replaced the part with a replacement.

Since replacing the part, it will not pick up any wifi signals in the house and surrounding areas, even the iPhone shows about 3 networks to connect to.

I decided to take it to work as we have 3 wireless networks, and the iPad picks them up with no problems. The wireless access point sits about 5 metres away. About 6 metres away sits a Cisco DSL router configured on 802.11n and it can't pick that up.

Any idea what could be the issue here? Could it be a software problem? I have hard reset the iPad and no difference.

Confused!

Beantwoord deze vraag Dit probleem heb ik ook

Is dit een goede vraag?

Score 0
Voeg een opmerking toe

1 Antwoord

Having the same problem and looking for solution

Was dit antwoord nuttig?

Score 0

1 Opmerking:

It turned out that the Wifi cable was faulty, ordered another and fitted it, worked like a charm. Apparently there is a certain level of quality that tey are built to, so might be worth looking into that. Good luck!

door

Voeg een opmerking toe
Weergavestatistieken:

Afgelopen 24 uren: 0

Afgelopen 7 dagen: 0

Afgelopen 30 dagen: 0

Altijd: 1,036