Following your instructions for the removal/replacement of the HD
PowerBook G4 Aluminum 12" 1-1.5 GHz Hard Drive Replacement
at Step 13 it indicates that there are 2 hex screws. I have a Torx T6 driver but it just spins in those screws.
Any recommendations on how to get those screws out (and back in)?
Is dit een goede vraag?
Rep: 2,2k
13
6
1
On the comments area beneath steps 9 to 16:
"I found that a T7 Torx screwdriver worked better for removing the two hex screws" slessard, Nov 7 2009 @ 2:33 PM
Was dit antwoord nuttig?
Afgelopen 24 uren: 0
Afgelopen 7 dagen: 0
Afgelopen 30 dagen: 0
Altijd: 318
