Ga door naar hoofdinhoud
Help

Origineel bericht door: oldturkey03 ,

Tekst:

tom, the pulleys should be aligned so that the belt runs level. If one of the pulley's is higher, your belt will shred since it is not running level. Get the instructions [https://groundscare.custhelp.com/ci/fattach/get/27787//session/L2F2LzEvdGltZS8xMzMzMzI2NDg2L3NpZC83U0FDUEFVaw==|from here.] Hope this helps, good luck.

Status:

open