Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: iRobot ,

Titel:

iPad 2 3g,Wifi and Bluetooth not working after front glass replacement

Tekst:

I have an iPad 2 3G, I fixed the broken digitizer after using the iPad as it was for around a month....

I also ripped the antenna from it's 3 screws securing it to the metal back housing, the wifi worked for a bit, Bluetooth also sometimes worked.

Having seen the price of the antenna and the realizing the hardest part I had already done, I ordered the the antenna fitted it in, and no wifi... No bluetooth....

WHEN I stand next to my router, I suddenly get a bar of wifi signal, but still no Bluetooth...

Really gutted, I want to seal this iPad back up, but It's really doing my nutt in... I refuse to give up....

I checked the continuity on the mini coaxial cable that connects to the logic board and it's shorting.... On the old antenna and the new one I bought, I was wanting to share results, can anyone do the same with an antenna they have spare or in front of them...

I know it's really small cable and it has 2 cores so are very easy to damage..l

BUT I need to know, if anyone's reading? Is there continuity at the coaxial plug of the antenna?

Further info is that I have not taken any of the tape of the adhesive stickers yet, that shouldn't make any difference though, as wifi works through walls and this is only a few pieces of tape we are talking about... I have asked the above question in an older thread but no joy, seeing though as its a common problem, but never properly diagnosed at least not in people's posts...

Apparaat:

iPad 2 Wi-Fi 3G

Status:

-open
+closed

Bewerkt door: Ims ,

Titel:

-Wifi and Bluetooth not working after front glass replacement
+iPad 2 3g,Wifi and Bluetooth not working after front glass replacement

Tekst:

I have an iPad 2 3G, I fixed the broken digitizer after using the iPad as it was for around a month....

I also ripped the antenna from it's 3 screws securing it to the metal back housing, the wifi worked for a bit, Bluetooth also sometimes worked.

Having seen the price of the antenna and the realizing the hardest part I had already done, I ordered the the antenna fitted it in, and no wifi... No bluetooth....

WHEN I stand next to my router, I suddenly get a bar of wifi signal, but still no Bluetooth...

Really gutted, I want to seal this iPad back up, but It's really doing my nutt in... I refuse to give up....

I checked the continuity on the mini coaxial cable that connects to the logic board and it's shorting.... On the old antenna and the new one I bought, I was wanting to share results, can anyone do the same with an antenna they have spare or in front of them...

I know it's really small cable and it has 2 cores so are very easy to damage..l

BUT I need to know, if anyone's reading? Is there continuity at the coaxial plug of the antenna?

Further info is that I have not taken any of the tape of the adhesive stickers yet, that shouldn't make any difference though, as wifi works through walls and this is only a few pieces of tape we are talking about... I have asked the above question in an older thread but no joy, seeing though as its a common problem, but never properly diagnosed at least not in people's posts...

Apparaat:

iPad 2 Wi-Fi 3G

Status:

open

Origineel bericht door: Ims ,

Titel:

Wifi and Bluetooth not working after front glass replacement

Tekst:

I have an iPad 2 3G, I fixed the broken digitizer after using the iPad as it was for around a month....

I also ripped the antenna from it's 3 screws securing it to the metal back housing, the wifi worked for a bit, Bluetooth also sometimes worked.

Having seen the price of the antenna and the realizing the hardest part I had already done, I ordered the the antenna fitted it in, and no wifi... No bluetooth....

WHEN I stand next to my router, I suddenly get a bar of wifi signal, but still no Bluetooth...

Really gutted, I want to seal this iPad back up, but It's really doing my nutt in... I refuse to give up....

I checked the continuity on the mini coaxial cable that connects to the logic board and it's shorting.... On the old antenna and the new one I bought, I was wanting to share results, can anyone do the same with an antenna they have spare or in front of them...

I know it's really small cable and it has 2 cores so are very easy to damage..l

BUT I need to know, if anyone's reading? Is there continuity at the coaxial plug of the antenna?

Further info is that I have not taken any of the tape of the adhesive stickers yet, that shouldn't make any difference though, as wifi works through walls and this is only a few pieces of tape we are talking about... I have asked the above question in an older thread but no joy, seeing though as its a common problem, but never properly diagnosed at least not in people's posts...

Apparaat:

iPad 2 Wi-Fi 3G

Status:

open