Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area of the cable that you wish to cover, so that the top tube covers the open length of the tube underneath i.e. cable completely covered and then heat them to shrink onto the cable sheath.
+
Slice 2 pieces of heatshrink tubing that is slightly bigger than the cable, along the length of the amount of tubing that you need to use and then overlap them around the area of the cable that you wish to cover, so that the top tubing covers the open length of the tubing underneath i.e. cable completely covered and then heat them to shrink both onto the cable sheath.
Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area that you wish to cover, so that the top tube covers the opening of the tube underneath and then heat them to shrink onto the cable sheath.
+
Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area of the cable that you wish to cover, so that the top tube covers the open length of the tube underneath i.e. cable completely covered and then heat them to shrink onto the cable sheath.
Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area that you wish to cover, so that each tube covers the open length of the other tube and then heat them to shrink onto the cable sheath.
+
Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area that you wish to cover, so that the top tube covers the opening of the tube underneath and then heat them to shrink onto the cable sheath.
Hi @carlotremolada
Slice 2 pieces of heatshrink tubing along the length of the amount of tubing that you need to use and then overlap them around the area that you wish to cover, so that each tube covers the open length of the other tube and then heat them to shrink onto the cable sheath.
Just what I'd try.