Ga door naar hoofdinhoud
Help

Origineel bericht door: Dave ,

Tekst:

The first thing any of you should do before changing the Driver IC and the coil is check the capacitors around the LCD connector. If any of these are shorted or grounding then you need to remove them one by one until the short disappears.

Only if the Caps are not shorted should you start along the driver IC route as it's tricky work and you'll need decent tools and skills.

Remeber to cover the POwer IC with silver foil before you start blasting around with a hot air gun! Best option is Infrared.

Status:

open