Ga door naar hoofdinhoud
Help

Origineel bericht door: Marvin Tang ,

Tekst:

@***++Tim Castilla++***   Thank you.  Charging the battery directly with USB charger works.  Rather than connecting to the pin of the connector, I just removed the insulation of the flex cable with the tips of tweezers. then used two tweezers to hold the black/red wires to make the connection to the exposed copper surface on the flex cable. You may want to patch the insulation with a small piece of electric tape. I just leave it as is.

Oh, one more thing, if you turn on the phone without the wireless charging pad restored, you will get the error of low batter temperature, with a red led light and a yellow triangle with ! sign inside. Just restore the wireless charging pad.

Status:

open