Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: iRobot ,

Titel:

After fall digitizer broke and back cover edge is a little bent

Tekst:

iPad 2 has fell on the ground and the digitizer broke. Unfortunately the edge of the back cover that hit the ground is a little bent too.

Is there any way to avoid replacing the back cover?

If I try to install a new digitizer without replacing the back cover will I have an issue during the installation?

Thank you in advance!

Apparaat:

iPad 2 Wi-Fi EMC 2415
iPad 2 Wi-Fi EMC 2415

Status:

open

Goedgekeurd antwoord:

70170

Bewerkt door: iRobot ,

Titel:

After fall digitizer broke and back cover edge is a little bent

Tekst:

iPad 2 has fell on the ground and the digitizer broke. Unfortunately the edge of the back cover that hit the ground is a little bent too.

Is there any way to avoid replacing the back cover?

If I try to install a new digitizer without replacing the back cover will I have an issue during the installation?

Thank you in advance!

Apparaat:

iPad 2 Wi-Fi

Status:

open

Goedgekeurd antwoord:

70170

Bewerkt door: Theo ,

Titel:

After fall digitizer broke and back cover edge is a little bent

Tekst:

iPad 2 has fell on the ground and the digitizer broke. Unfortunately the edge of the back cover that hit the ground is a little bent too.

Is there any way to avoid replacing the back cover?

If I try to install a new digitizer without replacing the back cover will I have an issue during the installation?

Thank you in advance!

Apparaat:

iPad 2 Wi-Fi

Status:

open

Goedgekeurd antwoord:

70170

Origineel bericht door: Theo ,

Titel:

After fall digitizer broke and back cover edge is a little bent

Tekst:

iPad 2 has fell on the ground and the digitizer broke. Unfortunately the edge of the back cover that hit the ground is a little bent too.

Is there any way to avoid replacing the back cover?

If I try to install a new digitizer without replacing the back cover will I have an issue during the installation?

Thank you in advance!

Apparaat:

iPad 2 Wi-Fi

Status:

open