Ga door naar hoofdinhoud
Help

Origineel bericht door: Andrew Vincent ,

Tekst:

It definitely sounds like it is in ‘limp home’ mode … this keeps the revs below 2000 - 2500 RPM.

It could be a number of things … but as you have already replaced a few components it makes sense to reset the ECU and then see if the error persists.  So … with the drivers door open disconnect the positive battery terminal then press the brake pedal a few times to make sure there’s no electrical power left in the system. Keep the battery unplugged for at least 10 minutes before connecting it back up and starting the car.

If the problem still happens then you will need to get the error codes checked with an OBD scanner

Status:

open