Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Origineel bericht door: Chris Stables ,

Tekst:

The best things to do are.

1.       Open the phone up and disconnect the battery.

2.       Remove the logic board from its housing.

3.       Swish the board around in 99% Isopropyl alcohol as well as brushing the exposed components like connectors with a soft toothbrush.

4.       When the board has dried you can put it back in the housing. You will know when it has dried when you cannot smell any alcohol on it.

5.       Install a new battery.

If it doesn’t power on after this you could try another screen but it will most likely be due to faulty component on the logic board due to the water and you will need to send it to a reputable repairer who at least should be able to retrieve your data if it wasn’t backed up.

Status:

open