Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: jayeff ,

Tekst:

Hi @dadzgrl ,
 
Did you try clearing the error codes as described by the tech sheet and then running the diagnostics again, to see what error codes now show? (see p.6 of the [document|25022]
 
Try placing both of the spray arms in a remembered position and then turning on the dishwasher. Allow it to fill etc and when it starts to “wash” open the door to stop the wash and check the spray arms to see if they have moved at all. Also check if the upper and lower dish racks are wet at all
Try placing both of the spray arms in a remembered position and then turning on the dishwasher. Allow it to fill etc and when it starts to “wash” open the door to stop the wash and check the spray arms to see if they have moved at all. Also check if the upper and lower dish racks are wet at all
 
If not then there may be a problem with the dishwasher pump and motor assembly (aka circulation pump) [https://www.searspartsdirect.com/model/45d1yszlie-001198/whirlpool-wdt720padm2-dishwasher-parts|part #15 - Pump, wash arm and motor parts] or the power supply to the pump. The pump wiring circuit is seen on p.4 of the Tech sheet under ''Wash/Rinse''.
 
'''Be safety aware''' ''if going to test for the power to the pump motor as it operates at mains supply voltage i.e. 120V AC''

Status:

open

Origineel bericht door: jayeff ,

Tekst:

Hi @dadzgrl ,

Did you try clearing the error codes as described by the tech sheet and then running the diagnostics again, to see what error  codes now show? (see p.6 of the [document|25022]

Try placing the spray arms in a remembered position and then turning on the dishwasher. Allow it to fill etc and when it starts to “wash” open the door to stop the wash and check the spray arms to see if they have moved at all. Also check if the upper and lower dish racks are wet at all

If not then there may be a problem with the dishwasher pump and motor assembly (aka circulation pump) [https://www.searspartsdirect.com/model/45d1yszlie-001198/whirlpool-wdt720padm2-dishwasher-parts|part #15 - Pump, wash arm and motor parts] or the power supply to the pump. The pump wiring circuit is seen on p.4 of the Tech sheet under ''Wash/Rinse''.

'''Be safety aware''' ''if going to test for the power to the pump  motor as it operates at mains supply voltage i.e. 120V AC''

Status:

open