I originally had Sud message on display. I left washer alone and eventually the message went away and I was left with error code F02. After research, I have found that this error code is due to not draining. I have done all the suggested things to make sure that drain is not plugged up or kinked etc.. I cannot find any "clean out" on my model washer. I have checked and the drum spins freely if I turn it by hand. Any other suggestions I can try or do I have to get a service technician to come out and look at it?
+
The washer displayed the SUD error message, so I left it alone and eventually the message went away and was replaced with error code F02. After research, I found that this error code is due to not draining. I have done all the suggested things to make sure that drain is not plugged up or kinked etc. I cannot find any "clean out" on my model washer. The drum spins freely if I turn it by hand. Is there anything else I can try to get the washer running again? Do I have to get a service technician to come out and look at it?
I originally had Sud message on display. I left washer alone and eventually the message went away and I was left with error code F02. After research, I have found that this error code is due to not draining. I have done all the suggested things to make sure that drain is not plugged up or kinked etc.. I cannot find any "clean out" on my model washer. I have checked and the drum spins freely if I turn it by hand. Any other suggestions I can try or do I have to get a service technician to come out and look at it?
I originally had Sud message on display. I left washer alone and eventually the message went away and I was left with error code F02. After research, I have found that this error code is due to not draining. I have done all the suggested things to make sure that drain is not plugged up or kinked etc.. I cannot find any "clean out" on my model washer. I have checked and the drum spins freely if I turn it by hand. Any other suggestions I can try or do I have to get a service technician to come out and look at it?
I originally had Sud message on display. I left washer alone and eventually the message went away and I was left with error code F02. After research, I have found that this error code is due to not draining. I have done all the suggested things to make sure that drain is not plugged up or kinked etc.. I cannot find any "clean out" on my model washer. I have checked and the drum spins freely if I turn it by hand. Any other suggestions I can try or do I have to get a service technician to come out and look at it?