Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Origineel bericht door: J.R. Murray ,

Tekst:

I ended up *very carefully* separating the digitizer from the OLED panel by using a 0.05mm molybdenum wire. Lots of glue rolling ensued. Now I have a fully functional bare LCD/OLED panel. Ordered a new glass with digitizer and then I’ll be set. [br]

One YouTube example used a hot decal scraper and that was just too scary for something so small. No thanks.

Status:

open