Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: J.R. Murray ,

Titel:

How to remove the digitizer (no glass) from OLED panel?

Tekst:

I tried to do a glass-only repair and remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel.  It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way.  Photos attached.

How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance!

[image|2286083]

[image|2286084]

Apparaat:

Apple Watch Series 4

Status:

open

Goedgekeurd antwoord:

672186

Bewerkt door: J.R. Murray ,

Titel:

How to remove the digitizer (no glass) from OLED panel?

Tekst:

I tried to do a glass-only repair and remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel. It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way. Photos attached.
I tried to do a glass-only repair and remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel. It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way. Photos attached.
 
How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance!
 
[image|2286083][image|2286084image|2286083]

[image|2286084
]
[image|2286083][image|2286084image|2286083]

[image|2286084
]

Apparaat:

Apple Watch Series 4

Status:

open

Bewerkt door: J.R. Murray ,

Titel:

How to remove the digitizer (no glass) from OLED panel?

Tekst:

I tried to remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel. It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way. Photos attached.
I tried to remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel. It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way. Photos attached.
 
How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance.advance!

[image|2286083][image|2286084]
How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance.advance!

[image|2286083][image|2286084]

Apparaat:

Apple Watch Series 4

Status:

open

Origineel bericht door: J.R. Murray ,

Titel:

How to remove the digitizer (no glass) from OLED panel?

Tekst:

I tried to remove the OLED+digitizer+polarizer from the (cracked) glass instead of removing the digitizer+polarizer+glass from the OLED panel.  It didn’t go well… I have a polarizer (I think) that’s flaking off and a small bubble imperfection on the edge of the digitizer. The display and touch both work, but I can’t reassemble it this way.

How do I remove the digitizer from the OLED panel without ruining the OLED? I tried heat once and it burned the OLED, presumably since there was no glass to act as a heat sink. What’s the best way to do this? I really don’t want to ruin the panel… they’re so expensive. Thanks in advance.

Apparaat:

Apple Watch Series 4

Status:

open