Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Jonathan Morrison ,

Titel:

Unable to activate Touch ID and Power Cycling after screen replacement
Unable to activate Touch ID and Power Cycling after screen replacement

Tekst:

After replacing the LCD and digitizer, I now get an error message saying “Unable to Activate Touch ID on this iPad”. I was very careful not to damage the home button or cable when removing it from the old screen. Also, the iPad now powers itself off and back on randomly. What could be causing this errorthese problems and how can I fix itthem? Thanks in advance.
After replacing the LCD and digitizer, I now get an error message saying “Unable to Activate Touch ID on this iPad”. I was very careful not to damage the home button or cable when removing it from the old screen. Also, the iPad now powers itself off and back on randomly. What could be causing this errorthese problems and how can I fix itthem? Thanks in advance.

Apparaat:

iPad Pro 10.5"

Status:

open

Origineel bericht door: Jonathan Morrison ,

Titel:

Unable to activate Touch ID after screen replacement

Tekst:

After replacing the LCD and digitizer, I now get an error message saying “Unable to Activate Touch ID on this iPad”. I was very careful not to damage the home button or cable when removing it from the old screen. What could be causing this error and how can I fix it? Thanks in advance.

Apparaat:

iPad Pro 10.5"

Status:

open