Ga door naar hoofdinhoud
Help

Origineel bericht door: Cory ,

Tekst:

I would double check the flex cable connection from the display assembly to the logic board. Take a look at the '''pins''' on the flex, and the '''pins''' on the ''FPC connector'' (where it connects on the logic board). Make sure they are both clean and free of debris.

Once that is verified, I would attempt an SMC/PRAM reset on the device.

# With the machine '''off''', plug in your charger
# Hold down '''Shift+Control+Option+Power'''
# Release key combination after '''10 seconds'''
# Turn the device '''on'''
# Hold down '''Command+Option+P+R'''
# Keep holding, '''wait for the second startup chime''' and then release
# Allow the device to boot into macOS
# Check your FaceTime camera again

Status:

open