Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: pollytintop ,

Tekst:

http://www.ifixit.com/Answers/View/38137/Microphone+not+working+when+making-receiving+calls this question seems to be the same as yours. the problem is a very strangely shaped screw..it's quite fat and long, philips head. When you reassemble the board thisthe big headed screw goeson the frame..he says it's the one to the left of the rear facing camera. I'm sorry in my first then later a longer screw goes intoanswer I read to the centreleft of it.

[guide|3148] step13 circled in orange 1.6mm screw. step 18
camera and assumed he meant the standoff screw..Hope you read this isbefore fiddling about with the screw mentioned by Imerajwrong screw..
http://www.ifixit.com/Answers/View/38137/Microphone+not+working+when+making-receiving+calls this question seems to be the same as yours. the problem is a very strangely shaped screw..it's quite fat and long, philips head. When you reassemble the board thisthe big headed screw goeson the frame..he says it's the one to the left of the rear facing camera. I'm sorry in my first then later a longer screw goes intoanswer I read to the centreleft of it.

[guide|3148] step13 circled in orange 1.6mm screw. step 18
camera and assumed he meant the standoff screw..Hope you read this isbefore fiddling about with the screw mentioned by Imerajwrong screw..

Status:

open

Bewerkt door: pollytintop ,

Tekst:

http://www.ifixit.com/Answers/View/38137/Microphone+not+working+when+making-receiving+calls this question seems to be the same as yours. the problem is a very strangely shaped screw..it's quite fat and long, philips head. When you reassemble the board this screw goes in first then later a longer screw goes into the centre of it.
 
[guide|3148] step13 circled in orange 1.6mm screw. step 18 this is the screw mentioned by amerajImeraj.
[guide|3148] step13 circled in orange 1.6mm screw. step 18 this is the screw mentioned by amerajImeraj.

Status:

open

Origineel bericht door: pollytintop ,

Tekst:

http://www.ifixit.com/Answers/View/38137/Microphone+not+working+when+making-receiving+calls this question seems to be the same as yours. the problem is a very strangely shaped screw..it's quite fat and long, philips head. When you reassemble the board this screw goes in first then later a longer screw goes into the centre of it.

[guide|3148] step13 circled in orange 1.6mm screw. step 18 this is the screw mentioned by ameraj.

Status:

open