Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Daniel ,

Titel:

Keys 1-9 only work when pressure is applied to the back/bottom of case

Tekst:

I finally took the plunge and replaced the battery with an iFixit battery after putting up with terrible battery life for months and everything was fine until a couple of weeks after when I noticed that the 1-9 keys stopped working and came back for a couple of minutes every now and again.
-After lots of looking online, resetting PRAM/SMC, tightening the battery, loosening the battery and replacing the trackpad ribbon cable I’ve narrowed it down to the number pad working fine when gentle to moderate pressure is applied to the back of the case over the area where the trackpad is.
+After lots of looking online, resetting PRAM/SMC, tightening the battery, loosening the battery and replacing the trackpad ribbon cable nothing has worked and I’ve narrowed it down to the number pad working fine when gentle to moderate pressure is applied to the back of the case over the area where the trackpad is.
There’s been no spills or any other issues.
Does anyone have any solutions for this?
Specs :-
early 2014 13” MacBook Air running OSX Catalina v10.15.4
1.7 GHz Dual-Core Intel Core i7
8 GB 1600 MHz DDR3

Apparaat:

MacBook Air 13" Early 2014

Status:

open

Bewerkt door: Daniel ,

Titel:

Keys 1-9 only work when pressure is applied to the back/bottom of case

Tekst:

-I finally took the plunge and replaced the battery after putting up with terrible battery life for months and everything was fine until a couple of weeks after when I noticed that the 1-9 keys stopped working and came back for a couple of minutes every now and again.
+I finally took the plunge and replaced the battery with an iFixit battery after putting up with terrible battery life for months and everything was fine until a couple of weeks after when I noticed that the 1-9 keys stopped working and came back for a couple of minutes every now and again.
After lots of looking online, resetting PRAM/SMC, tightening the battery, loosening the battery and replacing the trackpad ribbon cable I’ve narrowed it down to the number pad working fine when gentle to moderate pressure is applied to the back of the case over the area where the trackpad is.
There’s been no spills or any other issues.
Does anyone have any solutions for this?
Specs :-
early 2014 13” MacBook Air running OSX Catalina v10.15.4
1.7 GHz Dual-Core Intel Core i7
8 GB 1600 MHz DDR3

Apparaat:

MacBook Air 13" Early 2014

Status:

open

Origineel bericht door: Daniel ,

Titel:

Keys 1-9 only work when pressure is applied to the back/bottom of case

Tekst:

I finally took the plunge and replaced the battery after putting up with terrible battery life for months and everything was fine until a couple of weeks after when I noticed that the 1-9 keys stopped working and came back for a couple of minutes every now and again.

After lots of looking online, resetting PRAM/SMC, tightening the battery, loosening the battery and replacing the trackpad ribbon cable I’ve narrowed it down to the number pad working fine when gentle to moderate pressure is applied to the back of the case over the area where the trackpad is.

There’s been no spills or any other issues.

Does anyone have any solutions for this?

Specs :-

early 2014 13” MacBook Air running OSX Catalina v10.15.4

1.7 GHz Dual-Core Intel Core i7

8 GB 1600 MHz DDR3

Apparaat:

MacBook Air 13" Early 2014

Status:

open