Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: jayeff ,

Tekst:

Hi @redeye79 ,
 
As you say that everything has power, try performing a full control reset and check if this resolves the problem.
 
Here’s a link to the [ftp://ftp.electrolux-na.com/prodinfo_pdf/webster/A03225301.pdf|tech sheet] for the combo unit.
 
It will download automatically.
 
Once you have the file, see '''2 Entering Diagnostic Mode''' - ''''dodo a full control reset as in steps 3 to 55''. on page 1.
Once you have the file, see '''2 Entering Diagnostic Mode''' - ''''dodo a full control reset as in steps 3 to 55''. on page 1.

Status:

open

Bewerkt door: jayeff ,

Tekst:

Hi @redeye79 ,
 
As you say that everything has power, try performing a full control reset and check if this resolves the problem.
 
Here’s a link to the [ftp://ftp.electrolux-na.com/prodinfo_pdf/webster/A03225301.pdf|tech sheet] for the combo unit.
 
It will download automatically.
 
Once you have the file, see '''2 Entering Diagnostic Mode''' - '''' ''dodo a full control reset as in steps 3 to 5''5. on page 1.
Once you have the file, see '''2 Entering Diagnostic Mode''' - '''' ''dodo a full control reset as in steps 3 to 5''5. on page 1.

Status:

open

Bewerkt door: jayeff ,

Tekst:

Hi @redeye79 ,
 
As you say that everything has power, try performing a full control reset and check if this resolves the problem.
 
Here’s a link to the [ftp://ftp.electrolux-na.com/prodinfo_pdf/webster/A03225301.pdf|tech sheet] for the combo unit.
 
It will download automatically.
 
Once you have the file, see '''''22 Entering Diagnostic Mode''' -'' ''do- '''' ''do a full control reset as in steps 3 to 5''. on page 1.
Once you have the file, see '''''22 Entering Diagnostic Mode''' -'' ''do- '''' ''do a full control reset as in steps 3 to 5''. on page 1.

Status:

open

Origineel bericht door: jayeff ,

Tekst:

Hi @redeye79 ,

As you say that everything has power, try performing a full control reset and check if this resolves the problem.

Here’s a link to the [ftp://ftp.electrolux-na.com/prodinfo_pdf/webster/A03225301.pdf|tech sheet] for the combo unit.

It will download automatically.

Once you have the file, see '''''2 Entering Diagnostic Mode''' -''  ''do a full control reset as in steps 3 to 5''. on page 1.

Status:

open