Ga door naar hoofdinhoud

Origineel bericht door: Fred Fierling ,


'''Ear pad / Speaker'''

Both hinge pins are quite long and look like this:


They fit into holes in the ear pad / speaker assembly. I wouldn’t worry though which side you disassemble first. Though the hole approximately opposite the power switch looks easier to slip onto its pin:


It appears both would be equally difficult to disassemble:



Any li-po battery with a thermistor (white) lead, approximately the same maH rating and PCM should do. The [|XINJ LP502035] in my spare parts bin fits a bit too snugly, but works:


Yes, despite the above advice, I managed to break off a pin. :(