Ga door naar hoofdinhoud
Help

Origineel bericht door: Sammy ,

Tekst:

You may have inadvertently damaged digitizer connector on the logic board, judging from this picture

[image|1803236]

A caveat for replacing screen on 12.9” iPad Pro is to always make sure connectors are aligned before pushing them in, otherwise you’ll end up with broken connectors on logic board and/or screen flex which requires micro-soldering to fix = more $

As for the home button, you should release the lock mechanism first and then pull out the cable (piece of plastic on the left of home button connector, flip it upward to release).

Status:

open