Ga door naar hoofdinhoud
Help

Origineel bericht door: David Pagel ,

Tekst:

I have no power to the control panel. I have a controller similar to that described in one of the answers above. It appears the fuse is soldered in. the way I tested the fuse is to use an analog multimeter on each of the solder points.  2 questions.. Frst is that the correct procedure for testing that fuse, and Second, if the fuse is no good do I have to replace the controller. I am thinking there might be something else wrong beyond just a fuse like a thermostat or heating element.

Status:

open