Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Minho ,

Tekst:

Actually, it looks like the pad is not connected to anything, at least not on the surface. Perhaps that’s just because the picture isn’t zoomed in enough.
 
As for the schematic, you have to provide the logic board model number otherwise we’re just guessing.
 
 
 
EDIT
 
[image|1779130]

Status:

open

Bewerkt door: Minho ,

Tekst:

Actually, it looks like the connectorpad is not connected to anything, at least not on the surface. Perhaps that’s just because the picture isn’t zoomed in enough.
Actually, it looks like the connectorpad is not connected to anything, at least not on the surface. Perhaps that’s just because the picture isn’t zoomed in enough.
 
As for the schematic, you have to provide the logic board model number otherwise we’re just guessing.

Status:

open

Origineel bericht door: Minho ,

Tekst:

Actually, it looks like the connector is not connected to anything, at least not on the surface. Perhaps that’s just because the picture isn’t zoomed in enough.

As for the schematic, you have to provide the logic board model number otherwise we’re just guessing.

Status:

open