Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

[image|1779126]

[image|1779094]

[image|1779125]

Hey,

i had had a water damage Macbook come in for repair. I took the LCD Connector off because I noticed it was burnt on the right side of the logic board.

anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open

Goedgekeurd antwoord:

570723

Bewerkt door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

[image|1779126]
 
[image|1779094]
 
[image|1779125]
 
Hey,
 
i had had a water damage Macbook come in for repair. I took the LCD Connector off because I noticed it was burnt on the right side of the logic board.
 
anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open

Bewerkt door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

[image|1779126]
 
[image|1779094]
 
Hey,
 
i had had a water damage Macbook come in for repair. I took the LCD Connector off because I noticed it was burnt on the right side of the logic board.
 
anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open

Bewerkt door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

[image|1779094]Hey,image|1779094]
[image|1779094]Hey,image|1779094]
 
iHey,

i
had had a water damage Macbook come in for repair. I toldtook the LCD Connector off because I noticed it was burnt on the right side of the logic board.
iHey,

i
had had a water damage Macbook come in for repair. I toldtook the LCD Connector off because I noticed it was burnt on the right side of the logic board.
 
anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open

Bewerkt door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

Hey[image|1779094]Hey,
Hey[image|1779094]Hey,
 
i had had a water damage Macbook come in for repair. I told the LCD Connector off because I noticed it was burnt on the right side of the logic board.
 
anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open

Origineel bericht door: Daniel Ringuette ,

Titel:

Pulled lcd connector pad

Tekst:

Hey,

i had had a water damage Macbook come in for repair. I told the LCD Connector off because I noticed it was burnt on the right side of the logic board.

anyways, I pulled the connector off and noticed a pad was gone. I looked at the trace for it and it looks like the last pin is on the same circuit. Can some chime in to tell me if I could solder the pin over to that one? And possibly provide a schematic of this connector so I know what it does

Apparaat:

MacBook Air 13" Early 2015

Status:

open