Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Yung ,

Tekst:

Thanks to Danillo for solving this problem.
 
To revert your currently brick mod back to the stock firmware you need to download the Nuvoton firmware update software from [https://www.smoktech.com/faq/365|Smok’s website] and the [https://drive.google.com/file/d/1yXks2HjRFKLA5tq5T3fA9IxW4fqD4j5z/view|original firmware bin file].
 
# Remove the battery from your Smok device
# Open Nuvoton NuMicro ISP Programming Tool 2.00
 
#
Remove the battery from your Smok device

Open Nuvoton NuMicro ISP Programming Tool 2.00
#
Remove the battery from your Smok device

Open Nuvoton NuMicro ISP Programming Tool 2.00
 
[image|1681891]
 
# HoldHold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
# Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
# HoldHold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
# Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
 
#Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
#Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
 
[image|1681898]
 
# ClickClick on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑ the following

#
# ClickClick on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑ the following

#
 
[image|1681897]
 
# ClickClick '''Start''' and your device should be fixed

#
# ClickClick '''Start''' and your device should be fixed

#
 
[image|1681901]

Status:

open

Origineel bericht door: Yung ,

Tekst:

Thanks to Danillo for solving this problem.

To revert your currently brick mod back to the stock firmware you need to download the Nuvoton firmware update software from [https://www.smoktech.com/faq/365|Smok’s website] and the [https://drive.google.com/file/d/1yXks2HjRFKLA5tq5T3fA9IxW4fqD4j5z/view|original firmware bin file].

# Remove the battery from your Smok device
# Open Nuvoton NuMicro ISP Programming Tool 2.00

#

[image|1681891]

# Hold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
# Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen

#

[image|1681898]

# Click on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑  the following

#

[image|1681897]

# Click '''Start''' and your device should be fixed

#

[image|1681901]

Status:

open