Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: mark fitzgerald ,

Titel:

adhesive in repair kit not working well

Tekst:

I replaced the digitizer and screen for an ipad Air using one of the IFixIt kits, and it all worked well except there is one area on the right side near where the digitizer cables are located that doesn't appear to be adhered as well as it could be.  When you push down on the edge you can hear the adhesive stick and then eventually a bit later it will unstick with a small clicking sound.  Is there a liquid adhesive I could use by pulling up on the glass a bit and injecting underneath in that one little area? With a syringe-type applicator or something similar?  Thanks.

Apparaat:

iPad Air Wi-Fi

Status:

open

Goedgekeurd antwoord:

479182

Origineel bericht door: mark fitzgerald ,

Titel:

adhesive in repair kit not working well

Tekst:

I replaced the digitizer and screen for an ipad Air using one of the IFixIt kits, and it all worked well except there is one area on the right side near where the digitizer cables are located that doesn't appear to be adhered as well as it could be.  When you push down on the edge you can hear the adhesive stick and then eventually a bit later it will unstick with a small clicking sound.  Is there a liquid adhesive I could use by pulling up on the glass a bit and injecting underneath in that one little area? With a syringe-type applicator or something similar?  Thanks.

Apparaat:

iPad Air Wi-Fi

Status:

open