Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Dan (stem details) ,

Titel:

Try to swipe nand chip on working PCB

Tekst:

Hi Guys,

I have an issue, I have a very important usb key on which I want to recover data,

I know to do that I have 2 option : -Use a nand adapter to computer (SD often)

Or to swipe the nand chip on another usb pcb

The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information

It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)

The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,

Is it the right information ?

So is the adapter will manage to read the chip ?

If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,

So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?

Here some picture :

[image|1403158]

[image|1403163]

[image|1403167]

[image|1403190]

Thanks in advance for the time and help you will give me

I am sorry to be a newbie and speak bad english, all my apologies for that

Regards

Nico

Apparaat:

USB Flash Drive

Status:

open

Goedgekeurd antwoord:

475654

Bewerkt door: Nicolas Pournot ,

Titel:

Try to swipe nand chip on working PCB

Tekst:

Hi Guys,
 
I have an issue, I have a very important usb key on which I want to recover data,
 
I know to do that I have 2 option : -Use a nand adapter to computer (SD often)
 
Or to swipe the nand chip on another usb pcb
 
The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information
 
It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)
 
The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,
 
Is it the right information ?
 
So is the adapter will manage to read the chip ?
 
If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,
 
So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?
 
Here some picture :
 
[image|1402927]
[https://ibb.co/kaUQnH|Front chip with reference
image|1403158]
[image|1402927]
[https://ibb.co/kaUQnH|Front chip with reference
image|1403158]
 
'''missing'''
[https://ibb.co/kaUQnH|Chip back
[image|1403163]
'''missing'''
[https://ibb.co/kaUQnH|Chip back
[image|1403163]
 
'''missing'''
[https://ibb.co/kaUQnH|reballer stencil
[image|1403167]

[image|1403190
]
'''missing'''
[https://ibb.co/kaUQnH|reballer stencil
[image|1403167]

[image|1403190
]
 
Thanks in advance for the time and help you will give me
 
I am sorry to be a newbie and speak bad english, all my apologies for that
 
Regards
 
Nico

Apparaat:

USB Flash Drive

Status:

open

Bewerkt door: Dan ,

Titel:

Try to swipe nand chip on working PCB

Tekst:

Hi Guys,
 
I have an issue, I have a very important usb key on which I want to recover data,
 
I know to do that I have 2 option : -Use a nand adapter to computer (SD often)
 
Or to swipe the nand chip on another usb pcb
 
The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information
 
It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)
 
The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,
 
Is it the right information ?
 
So is the adapter will manage to read the chip ?
 
If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,
 
So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?
 
Here some picture :
 
[image|1402927]
[https://ibb.co/kaUQnH|Front chip with reference]
 
'''missing'''
[https://ibb.co/kaUQnH|Chip back]
 
'''missing'''
[https://ibb.co/kaUQnH|reballer stencil]
 
Thanks in advance for the time and help you will give me
 
I am sorry to be a newbie and speak bad english, all my apologies for that
 
Regards
 
Nico

Apparaat:

USB Flash Drive

Status:

open

Origineel bericht door: Nicolas Pournot ,

Titel:

Try to swipe nand chip on working PCB

Tekst:

Hi Guys,

I have an issue, I have a very important usb key on which I want to recover data,

I know to do that I have 2 option : -Use a nand adapter to computer (SD often)

Or to swipe the nand chip on another usb pcb

The issue I have is I can't manage after deep search to exactly identify the socket of this chip, the manufactor don't want to provide me this information

It is a SK Hynix chip, I supose E2NAND 64Gb (the ref of the usb key is GOODRAM twister 3.0 64Gb)

The socket looks like the LGA60 (of many iphone chip), but there some difference on some points,

Is it the right information ?

So is the adapter will manage to read the chip ?

If I want to swipe the cheap on another usb pcb, I need to reball it, but I didn't manage to find another stencil than LGA60, with some difference,

So Should I only fill the right whole ? or if there no contact, with the flux and the paste, put paste in all the whole of the stencil is not a problem ?

Here some picture :

[https://ibb.co/kaUQnH|Front chip with reference]

[https://ibb.co/kaUQnH|Chip back]

[https://ibb.co/kaUQnH|reballer stencil]

Thanks in advance for the time and help you will give me

I am sorry to be a newbie and speak bad english, all my apologies for that

Regards

Nico

Apparaat:

USB Flash Drive

Status:

open