Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: George McMahon ,

Titel:

Digitizer Plug on Logic Board

Tekst:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Apparaat:

iPad Mini GSM

Status:

open

Goedgekeurd antwoord:

+458895

Bewerkt door: George McMahon ,

Titel:

Digitizer Plug on Logic Board

Tekst:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Apparaat:

iPad Mini GSM

Status:

open

Goedgekeurd antwoord:

-458928

Bewerkt door: George McMahon ,

Titel:

Digitizer Plug on Logic Board

Tekst:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Apparaat:

iPad Mini GSM

Status:

open

Goedgekeurd antwoord:

+458928

Origineel bericht door: George McMahon ,

Titel:

Digitizer Plug on Logic Board

Tekst:

Hi Guys,

I have an Apple iPad Mini 1st Gen Model# A1432 here which needed the Digitizer replaced. The plug that the Ribbon Cable clips into on the Logic Board is missing some of the Gold Pins and as a result the Digitizer isn't working. I am not sure what this item is actually called. I was just wanting to know if anyone could help with the of that part and or if it is available to purchase. I will also need to Purchase a new LCD Screen at the same time as when I turned it on it's coming up with 2 apple logo's and lines across the screen. Any help would be greatly appreciated.  See picture attached the part I need is circled. Thank you in advance.

[image|1327865]

Regards,

George McMahon.

Apparaat:

iPad Mini GSM

Status:

open