Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Majesty ,

Tekst:

Chris after you installed the OS did you go through Software update and update the OS? If you havent please do so. Then reboot the machine and perform A PRAM reset. I had these issues when I upgraded to a 7200 RPM drive..it's working fine now. Another thing Chris...If you are installing via a USB cable to an external drive remember that USB data transfer speeds arent that of SATA or SATA2 so it's gonna take a lot longer to do the installation. Just be patient. I would just put the new drive in the machine and just boot directly into the installation disk and install that way. Way faster
Chris after you installed the OS did you go through Software update and update the OS? If you havent please do so. Then reboot the machine and perform A PRAM reset. I had these issues when I upgraded to a 7200 RPM drive..it's working fine now. Another thing Chris...If you are installing via a USB cable to an external drive remember that USB data transfer speeds arent that of SATA or SATA2 so it's gonna take a lot longer to do the installation. Just be patient. I would just put the new drive in the machine and just boot directly into the installation disk and install that way. Way faster

Status:

open

Origineel bericht door: Majesty ,

Tekst:

Chris after you installed the OS did you go through Software update and update the OS? If havent please do so. Then reboot the machine and perform A PRAM reset. I had these issues when I upgraded to a 7200 RPM drive..it's working fine now. Another thing Chris...If you are installing via a USB cable to an external drive remember that USB data transfer speeds arent that of SATA or SATA2 so it's gonna take a lot longer to do the installation. Just be patient. I would just put the new drive in the machine and just boot directly into the installation disk and install that way. Way faster

Status:

open