Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Scott

Titel:

How to remove the LCD display connctor cable from MB

Tekst:

-Hello, in the process of replacing the digital touch panel and screen, The video cable was pinched in the hinge and burned out. I have a replacement cable. In looking at the mother board connector, I can't tell if the connector slides into place or if you just lift up on it and snap it back down. any insight would be appreciated. Thanks.
+Hello, in the process of replacing the digital touch panel and screen, The video cable was pinched in the hinge and burned out. I have a replacement cable. In looking at the mother board connector, I can't tell if the connector slides into place or if you just lift up on it and snap it back down. any insight would be appreciated. Thanks.
=== Update (10/25/2017) ===
-Attached are a couple pics of the cable. 1 is the attached to the mother board and the other one is the underneath side of the new cable. Thanks [image|1223187][image|1223188]
+Attached are a couple pics of the cable. 1 is the attached to the mother board and the other one is the underneath side of the new cable. Thanks
+
+[image|1223187]
+
+[image|1223188]

Toestel:

Asus Q501LA

Status:

open

Goedgekeurd antwoord:

+436213

Bewerkt door: Scott

Titel:

How to remove the LCD display connctor cable from MB

Tekst:

-Hello, in the process of replacing the digital touch panel and screen, The video cable was pinched in the hinge and burned out. I have a replacement cable. In looking at the mother board connector, I can't tell if the connector slides into place or if you just lift up on it and snap it back down. any insight would be appreciated. Thanks.
+Hello, in the process of replacing the digital touch panel and screen, The video cable was pinched in the hinge and burned out. I have a replacement cable. In looking at the mother board connector, I can't tell if the connector slides into place or if you just lift up on it and snap it back down. any insight would be appreciated. Thanks.
+
+=== Update (10/25/2017) ===
+
+Attached are a couple pics of the cable. 1 is the attached to the mother board and the other one is the underneath side of the new cable. Thanks [image|1223187][image|1223188]

Toestel:

Asus Q501LA

Status:

open

Origineel bericht door: Scott

Titel:

How to remove the LCD display connctor cable from MB

Tekst:

Hello,  in the process of replacing the digital touch panel and screen, The video cable was pinched in the hinge and burned out. I have a replacement cable.  In looking at the mother board connector, I can't tell if the connector slides into place or if you just lift up on it and snap it back down. any insight would be appreciated. Thanks.

Toestel:

Asus Q501LA

Status:

open