Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Hashan Praveendra ,

Tekst:

I too had the same problem. Here's what I did.
The Problem may be also because of constant updating of the firmware.
-First download a software called '3Utools' at 'www.3u.com' . Meanwhile it gets downloaded, make sure you backup all your data that is on your phone either at itunes or icloud.
+First download a software called '3Utools' at '''''''www.3u.com''''''' . Meanwhile it gets downloaded, make sure you backup all your data that is on your phone either at itunes or icloud.
Before you start Flashing your phone go to ~ Settings>General >About > and from there see the version of the ios that has been installed on your phone. Then,
*Install 3Utools.
-*Go to firmware and download the previous version of the for the version that has been installed (i.e : If you had ios 10.2.3 recently ,download ios 10.2.2 or 10.2.1).
+*Go to firmware and download the previous version of the ios for the version that has been installed (i.e : If you had ios 10.2.3 recently ,download ios 10.2.2 or 10.2.1).
*First restore your phone(Full Restore).
*Connect your phone to PC.
*Then put ypur iphone yo recovery mode (http://www.iclarified.com/367/how-to-put-an-iphone-into-recovery-mode).
* Then Install the firmware that has been downloaded.
The problem will be solved.
Thank you!
Hashan.

Status:

open

Origineel bericht door: Hashan Praveendra ,

Tekst:

I too had the same problem. Here's what I did.

The Problem may be also because of constant updating of the firmware.

First download a software called '3Utools' at 'www.3u.com' . Meanwhile it gets downloaded, make sure you backup all your data that is on your phone either at itunes or icloud.

Before you start Flashing your phone go to ~ Settings>General >About > and from there see the version of the ios that has been installed on your phone. Then,

*Install 3Utools.

*Go to firmware and download the previous version of the for the version that has been installed (i.e : If you had ios 10.2.3 recently ,download ios 10.2.2 or 10.2.1).

*First restore your phone(Full Restore).

*Connect your phone to PC.

*Then put ypur iphone yo recovery mode (http://www.iclarified.com/367/how-to-put-an-iphone-into-recovery-mode).

* Then Install the firmware that has been downloaded.

The problem will be solved.

Thank you!

Hashan.

Status:

open