Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: BunkerS ,

Tekst:

-Thank you for your help, Reece! I'll go ahead and clean up my question and provide a specific answer to my question below, although I highly recommend reading the board view and schematic yourself (links at bottom of post).
+Thank you for your help, Reece! I'll go ahead and clean up my question and provide a specific answer to my question below. If you're attempting this repair, I highly recommend reading the board view and schematic yourself (links at bottom of post).
I was able to find both a '''''correct''''' board view and schematic. From that, the component values are:
R9000- 0 Ohms (Just use a jumper)
R9001- 1M Ohms
r9002- 1M Ohms
C9028- 0.1uF
R9003 - 1M Ohms
C9029 - 0.1 uF
All of these components have a package type denoted [0201].
'''NOTE: Please see the board view and PDF for tolerance, temperature rating, and dielectric composition, ect.'''
Openboardview(open source board view software): http://openboardview.org
Schematic and board view for 820-3332:http://www.apple-schematic.se/board/820-3332/

Status:

open

Bewerkt door: BunkerS ,

Tekst:

Thank you for your help, Reece! I'll go ahead and clean up my question and provide a specific answer to my question below, although I highly recommend reading the board view and schematic yourself (links at bottom of post).
I was able to find both a '''''correct''''' board view and schematic. From that, the component values are:
R9000- 0 Ohms (Just use a jumper)
R9001- 1M Ohms
r9002- 1M Ohms
C9028- 0.1uF
R9003 - 1M Ohms
C9029 - 0.1 uF
All of these components have a package type denoted [0201].
'''NOTE: Please see the board view and PDF for tolerance, temperature rating, and dielectric composition, ect.'''
-Openboardview(Open Source board view Software): http://openboardview.org
+Openboardview(open source board view software): http://openboardview.org
Schematic and board view for 820-3332:http://www.apple-schematic.se/board/820-3332/

Status:

open

Bewerkt door: BunkerS ,

Tekst:

-Thank you for your help! I'll go ahead and clean up my question and provide a specific answer to my question below.
+Thank you for your help, Reece! I'll go ahead and clean up my question and provide a specific answer to my question below, although I highly recommend reading the board view and schematic yourself (links at bottom of post).
I was able to find both a '''''correct''''' board view and schematic. From that, the component values are:
R9000- 0 Ohms (Just use a jumper)
R9001- 1M Ohms
r9002- 1M Ohms
C9028- 0.1uF
R9003 - 1M Ohms
C9029 - 0.1 uF
All of these components have a package type denoted [0201].
'''NOTE: Please see the board view and PDF for tolerance, temperature rating, and dielectric composition, ect.'''
Openboardview(Open Source board view Software): http://openboardview.org
Schematic and board view for 820-3332:http://www.apple-schematic.se/board/820-3332/

Status:

open

Origineel bericht door: BunkerS ,

Tekst:

Thank you for your help! I'll go ahead and clean up my question and provide a specific answer to my question below.

I was able to find both a '''''correct''''' board view and schematic. From that, the component values are:

R9000- 0 Ohms (Just use a jumper)

R9001- 1M Ohms

r9002- 1M Ohms

C9028- 0.1uF

R9003 - 1M Ohms

C9029 - 0.1 uF

All of these components have a package type denoted [0201].

'''NOTE: Please see the board view and PDF for tolerance, temperature rating, and dielectric composition, ect.'''

Openboardview(Open Source board view Software): http://openboardview.org

Schematic and board view for 820-3332:http://www.apple-schematic.se/board/820-3332/

Status:

open