Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: Samuel Sosina ,

Titel:

Damaged screen display cable. Is it easy to replace myself?

Tekst:

So i've fitted a new hard drive for IMac mid 2010 21" edition. Upon putting everything back in place i've struggled to insert the screen display data cable into his port. Upon proper Inspection it seems that part of the pins in my socket is damaged.
 
This is what it looks like.. proper damaged right?
 
[image|1129047]
 
[image|1129045]
 
.
 
The socketport for the display cable on motherboardthe logic board looks fine to me. Thoughts?
The socketport for the display cable on motherboardthe logic board looks fine to me. Thoughts?
 
[image|1129056]
 
I've found the part on Ebay and wondering if its fairly simple to replace myself? local shops have quoted me £100 to repair and i'm by no means rich but brave enough to give it a go. I ask because I don't want to cause any further damage to the unit.
 
Thanks in advance!

Apparaat:

iMac Intel 21.5" EMC 2389

Status:

open

Origineel bericht door: Samuel Sosina ,

Titel:

Damaged screen display cable. Is it easy to replace myself?

Tekst:

So i've fitted a new hard drive for IMac mid 2010 21" edition. Upon putting everything back in place i've struggled to insert the screen display data cable into his port. Upon proper Inspection it seems that part of the pins in my socket is damaged.

This is what it looks like.. proper damaged right?

[image|1129047]

[image|1129045]

.

The socket for the display cable on motherboard looks fine to me. Thoughts?

[image|1129056]

I've found the part on Ebay and wondering if its fairly simple to replace myself? local shops have quoted me £100 to repair and i'm by no means rich but brave enough to give it a go. I ask because I don't want to cause any further damage to the unit.

Thanks in advance!

Apparaat:

iMac Intel 21.5" EMC 2389

Status:

open