Ga door naar hoofdinhoud
Help

Origineel bericht door: Minho ,

Tekst:

Did the repair shop tell you what they did exactly to "clean" the water away? You should call them them and ask. Water damaged phones can have a wide range of problems, many times they are difficult or impossible to repair properly.

If you are comfortable opening up the phone, you can try :

* Open your phone and remove the logic board ([guide|57073|follow this guide])
* Inspect the logic board, especially around the connectors and look for corrosion.
* Inspect both sides of the board. Unfortunately, 80% of the board is covered in shields. That's usually where the damage is occurring.
* Put your board in a container with >90% isopropyl alcohol and let it sit for a while.
* Use a soft brush, like a toothbrush and lightly brush away any corrosion you see.
* Rinse in alcohol and repeat.
* Let it air dry for a day.
* Re-assemble and hope for the best.
* You should also consider getting a new battery

A professional repair shop that does water damage repair may be able to recover your phone or the data because they have access to pro-level ultrasonic baths and specialized cleaners as well as the skills (and parts) to troubleshoot your board. Many shops have a no fix/no fee policy so you don't have to spend money to find out if the phone is fixable or not.

Status:

open