Ga door naar hoofdinhoud
Help

Origineel bericht door: iMedic ,

Tekst:

You need to clean that bad boy! An ultrasonic bath is really the best option. But you could possibly get away cleaning the logic board with a tooth brush, and 90% isopropyl alcohol. You also may need to have the u2ic replaced, for which you'll want to send it off to a board repair shop

Weird. There's no logic board replacement guide. Guess I'll have to make one. Pay attention to the octagon screw, I use a needle nose for right now

[guide|48170]

[[Electronics Water Damage]]

Status:

open