Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help

Deze versie is geschreven door: unsubstantiated ,

Tekst:

Since you asked this question, iFixit added a special standoff bit to their tools catalogue.
 
[product|IF145-343|iPhone Standoff Screwdriver Bit (Item code: IF145-343-1)]
 
I use a 'STANLEY 63-310 U.S.A.' pocket slotted screwdriver for this task. It is good, though not perfect: its blade is just slightly wider than screw head, so it will collide into nearby components. I need to slide it slightly after every half turn, so it overhangs clear/free area, instead of overhanging populated area and bumping into parts.
I use a 'STANLEY 63-310 U.S.A.' pocket slotted screwdriver for this task. It is good, though not perfect: its blade is just slightly wider than screw head, so it will collide into nearby components. I need to slide it slightly after every half turn, so it overhangs clear/free area, instead of overhanging populated area and bumping into parts.

Status:

open

Origineel bericht door: unsubstantiated ,

Tekst:

Since you asked this question, iFixit added a special standoff bit to their tools catalogue.

[product|IF145-343|iPhone Standoff Screwdriver Bit (Item code: IF145-343-1)]

I use a 'STANLEY 63-310 U.S.A.' pocket screwdriver for this task.  It is good, though not perfect: its blade is just slightly wider than screw head, so it will collide into nearby components.  I need to slide it slightly after every half turn, so it overhangs clear/free area, instead of overhanging populated area and bumping into parts.

Status:

open