Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: ProConsoles ,

Tekst:

It took me some time to find the best cleaning solution for LCD's, like fingerprints.
 
Never use cotton swabs, or 100% isopropyl alcohol (IPA).
 
100% IPA evaporates too fast and you can make the little spot like a fingerprint, larger.
 
What I do is the following:
 
Mix 50% IPA with 50% demineralised and distilled water. That solution is strong enough to clean the spot, and will not evaporate too fast.
 
Then use Anti-Static Foam Swabs for cleaning BGA/PCB 50 Swabs (Cleaning Swabs CM-FS712 CleanTip) and take 2 pieces.
Then use Anti-Static Foam Swabs for cleaning BGA/PCB 50 Swabs (Cleaning Swabs CM-FS712 CleanTip) and take 2 pieces.
 
Put less then a drop (as little as possible) on 1 foam swab, and remove the spot. Particles of the IPA mixture will stay on the LCD.
 
With the other dry foam swab, remove the rest of IPA mixture from the LCD.
 
In that way, you can perfectly remove the spot.

Status:

open

Origineel bericht door: ProConsoles ,

Tekst:

It took me some time to find the best cleaning solution for LCD's, like fingerprints.

Never use cotton swabs, or 100% isopropyl alcohol (IPA).

100% IPA evaporates too fast and you can make the little spot like a fingerprint, larger.

What I do is the following:

Mix 50% IPA with 50% demineralised and distilled water. That solution is strong enough to clean the spot, and will not evaporate too fast.

Then use Anti-Static Foam Swabs for cleaning BGA/PCB 50 Swabs (Cleaning Swabs CM-FS712 CleanTip) and take 2 pieces.

Put less then a drop (as little as possible) on 1 foam swab, and remove the spot. Particles of the IPA mixture will stay on the LCD.

With the other dry foam swab, remove the rest of IPA mixture from the LCD.

In that way, you can perfectly remove the spot.

Status:

open