Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Onderdelen & Gereedschap

Help

Deze versie is geschreven door: Sam Goldheart (stem details) ,

Tekst:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

Status:

deletedopen
deletedopen

Bewerkt door: iRobot ,

Tekst:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

Status:

opendeleted
opendeleted

Origineel bericht door: anonymous 4923 ,

Tekst:

Remove the Power Supply.  Right next to the heat sink is a plateau.   There is  a notch in the power supply to avoid it...on the side opposite the power supply's wires.  Place 2 Irwin Utility Knife Blades on the plateau, so that the power supply will apply the pressure for you.  Retighten the powersupply.  Enjoy!!

Status:

open