Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Dan ,

Tekst:

You'll need to replace the damaged DC-in Board to start things off. But I suspect you have some deeper issues here.
 
Your MagSafe power adapter is likely bad. Is the cord damaged? The cord needs to be smooth along its length and ends not frayed or bumpy. These are signs of a shorted connection within the cord.
 
The next issue is the logic board its self, hopefully the SMC circuit didn't get damaged but the charging circuit might have.
 
Download this little app so you can see whats happening: [http://www.coconut-flavour.com/coconutbattery|CoconetBatteryhttp://www.coconut-flavour.com/coconutbattery|CoconutBattery]. Post a screen shot in your question of what it shows so we can see it as well.
Download this little app so you can see whats happening: [http://www.coconut-flavour.com/coconutbattery|CoconetBatteryhttp://www.coconut-flavour.com/coconutbattery|CoconutBattery]. Post a screen shot in your question of what it shows so we can see it as well.

Status:

open

Bewerkt door: Dan ,

Tekst:

You'll need to replace the damaged DC-in Board to start things off. But I suspect you have some deeper issues here.
 
Your MagSafe power adapter is likely bad. Is the cord damaged? The cord needs to be smooth along its length and ends not frayed or bumpy. These are signs of a shorted connection within the cord.
 
The next issue is the logic board its self, hopefully the SMC circuit didn't get damaged but the charging circuit might have.
 
Download this little app so you can see whats happening: [http://www.coconut-flavour.com/coconutbattery/]CoconetBatteryhttp://www.coconut-flavour.com/coconutbattery|CoconetBattery]. Post a screen shot in your question of what it shows so we can see it as well.
Download this little app so you can see whats happening: [http://www.coconut-flavour.com/coconutbattery/]CoconetBatteryhttp://www.coconut-flavour.com/coconutbattery|CoconetBattery]. Post a screen shot in your question of what it shows so we can see it as well.

Status:

open

Origineel bericht door: Dan ,

Tekst:

You'll need to replace the  damaged DC-in Board to start things off. But I suspect you have some deeper issues here.

Your MagSafe power adapter is likely bad. Is the cord damaged? The cord needs to be smooth along its length and ends not frayed or bumpy. These are signs of a shorted connection within the cord.

The next issue is the logic board its self, hopefully the SMC circuit didn't get damaged but the charging circuit might have.

Download this little app so you can see whats happening: [http://www.coconut-flavour.com/coconutbattery/]CoconetBattery]. Post a screen shot in your question of what it shows so we can see it as well.

Status:

open