Ga door naar hoofdinhoud
Help

Deze versie is geschreven door: Miroslav Djuric ,

Tekst:

-I strongly suggest you do not use a Dremel unless it is the absolute last resort. You risk cutting into any of the components around the screw.
-
-Instead, dab a very small amount of superglue on the screw head, then rest the screwdriver on top of the screw -- try to prop it in the corner of a shelf, for example. Let time and gravity do it course (about 4 hours or overnight for the glue to really solidify) and then slowly and firmly try to unscrew the screw.
+Dab a very small amount of superglue on the screw head, then rest the screwdriver on top of the screw -- try to prop it in the corner of a shelf, for example. Let time and gravity do it course (about 4 hours or overnight for the glue to really solidify) and then slowly and firmly try to unscrew the screw.
This procedure has worked four out of six times for me.

Status:

open

Bewerkt door: Miroslav Djuric ,

Tekst:

-I strongly suggest you '''do not''' use a Dremel unless it is the absolute last resort. You risk cutting into any of the components around the screw.
+I strongly suggest you do not use a Dremel unless it is the absolute last resort. You risk cutting into any of the components around the screw.
Instead, dab a very small amount of superglue on the screw head, then rest the screwdriver on top of the screw -- try to prop it in the corner of a shelf, for example. Let time and gravity do it course (about 4 hours or overnight for the glue to really solidify) and then slowly and firmly try to unscrew the screw.
This procedure has worked four out of six times for me.

Status:

open

Origineel bericht door: Miroslav Djuric ,

Tekst:

I strongly suggest you '''do not''' use a Dremel unless it is the absolute last resort. You risk cutting into any of the components around the screw.

Instead, dab a very small amount of superglue on the screw head, then rest the screwdriver on top of the screw -- try to prop it in the corner of a shelf, for example. Let time and gravity do it course (about 4 hours or overnight for the glue to really solidify) and then slowly and firmly try to unscrew the screw.

This procedure has worked four out of six times for me.

Status:

open