Ga door naar hoofdinhoud

Repareer je spullen

Recht op reparatie

Winkel

Help

Deze versie is geschreven door: oldturkey03 ,

Tekst:

larry, "see the menu but very faint i also can see the glow" means your backlight is out. thisThis could be a PSU issue for simply not supplying enough power to your backlight. The next possibility could be the LCDLED driver board itself. I'd check for any bad/broken caps and bad solder joints. If not results with that I'd replace the board. Part number for that is 715G4863-P01-000-004S Post some images of all your boards with your question. Maybe we can see something a bit more obvious. Use [guide|21499|this guide] to post images with your question.
larry, "see the menu but very faint i also can see the glow" means your backlight is out. thisThis could be a PSU issue for simply not supplying enough power to your backlight. The next possibility could be the LCDLED driver board itself. I'd check for any bad/broken caps and bad solder joints. If not results with that I'd replace the board. Part number for that is 715G4863-P01-000-004S Post some images of all your boards with your question. Maybe we can see something a bit more obvious. Use [guide|21499|this guide] to post images with your question.

Status:

open

Origineel bericht door: oldturkey03 ,

Tekst:

larry, "see the menu but very faint i also can see the glow" means your backlight is out. this could be PSU issue for simply not supplying enough power to your backlight. The next possibility could be the LCD driver board itself. I'd check for any bad/broken caps and bad solder joints. If not results with that I'd replace the board. Part number for that is  715G4863-P01-000-004S Post some images of all your boards with your question. Maybe we can see something a bit more obvious. Use [guide|21499|this guide] to post images with your question.

Status:

open